High Modulus Silicone Sealant 590ml Automotive Glass Sealant

Product Details
Customization: Available
Material: Silicone, Metal
Usage: Automotive
Still deciding? Get samples of US$ 1/Piece
Request Sample

360° Virtual Tour

Diamond Member Since 2020

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
7208038 USD
Plant Area
100000 square meters
  • High Modulus Silicone Sealant 590ml Automotive Glass Sealant
  • High Modulus Silicone Sealant 590ml Automotive Glass Sealant
  • High Modulus Silicone Sealant 590ml Automotive Glass Sealant
  • High Modulus Silicone Sealant 590ml Automotive Glass Sealant
  • High Modulus Silicone Sealant 590ml Automotive Glass Sealant
  • High Modulus Silicone Sealant 590ml Automotive Glass Sealant
Find Similar Products

Basic Info.

Model NO.
JB18
Model No.
9700
Shelf Life
12 Months
Certificate
ISO9001, ISO14001, BV
Trade Mark
OEM
Storage Temperature
0~27
Formula
(CH3)3sio(CH3)2sionsi(CH3)3
Einecs
230-391-5
CAS No
7085-85-0
Type
Silicone Sealant
Seal Tape Kind
Liquid Tape
Seal Tape Usage
Gas Piping, Engineering, Fire Fighting Pipeline, Plumbing
State
Fluid
Mildew Proof
Mildew Proof
Bonding Material
Aluminum
After-sales Service
9009-54-5
Transport Package
Ship
Specification
590ml
Trademark
Junbond
Origin
China
HS Code
3506100010
Production Capacity
10000 Cartons/Year

Product Description

Weathering Performance And Durability Car Glass Exterior Joint Sealing Windshield Polyurethane Sealant


Junbond® JB-16 is a one-component polyurethane adhesive-sealer for pasting windshields where an increased safety guarantee is not required. It is used for fixing the front, rear and side windows to the bodies of cars, vans, railway transport and special purpose vehicles.


Junbond®JB-16 Windshield Polyurethane Sealant an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.

 

Products Benefit:

a. Fast curing under room temperature, no sagging, solvent free
b. High bonding strength,
c. Good chemical and water resistance
d. No conductive
e. Excellent noise, vibration and impaction resistance
f. Automotive OEM quality


Properties
  • One component formulation
  • Good non-sag properties
  • Short cut-off string
  • Cold application
  • Fast curing - Rapid strength development
  • High mechanical performance
  • High Modulus
  • High initial bond strength


General information:
1
Brand Name
Junbond
2
Model
JB16
3
Main Material
Polyurethane
4
Type
One component
5
Color
Black
6
Packaging
590ml sausage
7
Carton
20 pieces/carton
8
Shipping
By sea
9
Application
Car window glass
10
Certificate
ISO9001:2000, MSDS
11
Shelf life
9 -12 Months(4°C-40°C)
12
OEM/OEM
Available
Application Areas:Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.

Technical data:

Items Properties
Appearance Black, homogeneous paste
Sagging properties(mm) GB/T 13477.6

0
Tack free time(min) GB/T 13477.5

20, approx.
Curing speed(mm/d) HG/T 4363

3.2, approx.
Non-volatile contents ( %) GB/T 2793

95, approx.
Shore A-hardness GB/T 531.1

60, approx.
Tensile strength(MPa) GB/T 528

3.5, approx.
Elongation at break(%) GB/T 528

350, approx.
Tear strength( N/mm) GB/T 529

6.0, approx.
Tensile-shear strength(MPa)GB/T 7124

1.5, approx.
Operating temperature(ºC)

-40~90



Cautions
1. Use in a ventilated place,it will lead to allergies if contact the uncured polyurethane selant for long time.
2. Ensure the polyurethane selant sealing well, keep away from heat source, direct sunshine.
3. Avoide contacting skins, keep away from kids.
4. The cured polyurethane sealant is very safe.



Direction for use
  • Remove dust, oil and water from the surface of substrates.
  • Application environment temperature 5~35ºC, humidity 50~70%RH. When the temperature below 5ºC, recommended place products in the environment of 30~40ºC for 1H (No more than 3H).
  • For Construction method, please refer to PUSTAR construction description or consult technical personnel.
  • Activator and primer are not required.


Transport and storage
  • Transport: Keep away the sealed product from moisture, the sun, high temperature and avoid collisions.
  • Storage: Keep sealed into cool, dry place.
  • Storage temperature: 5~25ºC. Humidity: ≤50%RH.
  • Cartridge and Sausage 9 month, Pail 6 month.
Packing specification
  • 300ml plastic cartridges
  • 600ml in sausage
  • 200L in barrel


Color
  • Black

Application:                                                                                                                                                  

High Modulus Silicone Sealant 590ml Automotive Glass Sealant

 

 

 

Junbom Hui Bei Factory                                                                                                                              

High Modulus Silicone Sealant 590ml Automotive Glass Sealant

 

 

Package & Delivery                                                                                                                                     

 

High Modulus Silicone Sealant 590ml Automotive Glass Sealant

 

Certificate                                                                                                                                                       

High Modulus Silicone Sealant 590ml Automotive Glass Sealant

 

 

FAQ                                                                                                                                                               

 

Q1. Can I get samples to test before bulk order ?
A: Yes, we welcome sample order to test and check quality.


Q2. Do you have any MOQ limit for order?
A: Low MOQ, 3000pcs for order is availabl. And depend on your needs.

 

Q3. How to proceed an order for polyurethane sealant?
A:Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.


Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by freight forwarding. It usually takes about 20---30 days to arrive. FCL and LCL, shipping can optional.

 

Q5. What about the lead time?

A:Sample needs 2-3 day, bulk production time around needs 1-2 weeks(the specific time depends on the number of orders.)

 

If you want to know more details information, pls just feel free to contact us! :)

 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier