Junbond Jb7132 Super Seal Acetic Glass Sealant

• Customization: Available
• Color: Black, White, Grey, OEM Colorful
• Material: Metal
• Model NO.: JB7132
• Model No.: Jb-5160
• Shelf Life: 12 Months
• Certificate: ISO9001, ISO14001, BV
• Trade Mark: Dow Corning
• Storage Temperature: 0~27
• Formula: (CH3)3sio(CH3)2sionsi(CH3)3
• Einecs: 230-391-5
• CAS No: 7085-85-0
• Name: Silicone Sealant
• Cure: Acetic Cure
• Useage: Glass, Aluminum, Fish Tank, General Purpose
• Price: Competitive
• Factroy: Junbond
• Payment Term: Tt, L/C, Paypal
• Type: Silicone Sealant
• Seal Tape Kind: Liquid Tape
• Seal Tape Usage: Gas Piping, Engineering, Fire Fighting Pipeline, Plumbing
• State: Fluid
• Mildew Proof: Mildew Proof
• Bonding Material: Glass
• After-sales Service: Warranty
• Transport Package: by Drum; by Cartridge
• Specification: 200L; 300ml; 280ml
• Trademark: OEM
• Origin: China
• HS Code: 321410900
• Production Capacity: 10000tons/Year

Product Description

Junbond adhesive to fish glass aquarium silicone sealant water tank quick dry silicone sealant

Product Feature:
1. Single component, acidic room temperature cure.
2. Excellent adhesion to glass and most building materials.
3. Cured silicone rubber elastomer with excellent long-term performance in the temperature range of -50° C to +100° C.

Main Application:
1. Caulking and sealing for interior and exterior decoration projects
2. Bonding and sealing of large floor-to-ceiling glass assemblies
3. Bonding and sealing of high-block glass cabinets and glass crafts
4. Large plate glass, small fish tanks less than 50cm in height, bonding and sealing of light roof craft glass structures
5. Other uses tested and applicable

How to use:
1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitability
of the product.
2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutes
after cleaning.
3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with the
surface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.
4. Suitable application temperature range 5°C to 40°C.

Warnings:
1. Use in a well-ventilated environment.
2. Use solvents in accordance with the appropriate safety regulations.
3. Keep the product out of the reach of children.
4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.


Executive Standard: GB/T14683-2017

No	Test Item		Unit	Actual results
1	Appearance		-	Smooth, no air bubbles, no lumps
2	Tack free time(at what % humidity)		min	4
3	Slump	Vertical	mm	0
		Horizontal	mm	Not deformed
4	Extrusion		ml/min	1538
5	Shore A hardness /72h		-	26
6	Shrinkage		%	/
7	Effect of heat aging on		-
	- Weight loss		%	13.0%
	- Cracking		-	No
	- Chalking		-	No
8	Tensile adhesion		Mpa
	- Standard condition			0.53
	- Immersion in water			/
	- Dry at 100°C			/
9	Elongation at break		%	112
10	Specific gravity		g/cm3	1
11	Completely dry		hours	16
12	Temperature Resistence		°C	-50ºC~150ºC
13	Application Temperature		°C	4ºC~40ºC
14	Color			Transparent