Gasket Sealant RTV Red Super High Temperature Resistance Silicone Sealant Glue

• CAS No.: 7085-85-0
• Formula: Mixture
• EINECS: 230-391-5
• Bonding Function: Structural Adhesive
• Morphology: Paste
• Application: Construction, Woodworking, Footwear & Leather, Fiber & Garment
• Model NO.: JB9600
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Silicone
• Characteristic: Waterproof
• Composition: Organic Material
• Color: White, Translucent
• Package 1: Cartridge
• Volume: 300ml
• Package 2: 24PCS Per Carton
• Feature: Neutral Cure
• Transport Package: 300ml * 24 Tubes / Carton
• Specification: 300ml
• Trademark: junbond
• Origin: China
• HS Code: 3506100010
• Production Capacity: Fifty Million Pieces/Year

Product Description

 

Gasket Sealant RTV Red Super High Temperature Resistance Silicone Sealant Glue

 

Product Feature:
1. Single component, easy to use, good extrudability and thixotropy in the temperature range of 4°C ~ 40°C, can be applied
directly by using a glue gun;
2. After curing, it will not become brittle, harden or crack at low temperatures of -30°C. It will not soften or degrade at high
temperatures, but will shrink to a certain extent and increase in hardness;
3. Excellent weathering resistance, aging, UV, ozone and water resistance;
4. Excellent resistance to high and low temperatures, will not become brittle, hardened or cracked at -30°C after curing, and
will not become soft and degraded at high temperatures, but there is a certain shrinkage, and the hardness has increased;
5. Good adhesion, forming a strong seal with most building materials when cured without the need for a primer;
6. Good compatibility with other neutral silicone adhesives.

Main Application:
1. All kinds of doors and windows installation, stone caulking sealing;
2. Various small aluminium panels and glass walls;
3. Kitchen and bathroom installation;
4. Caulking and sealing of indoor metal structure projects;
5. Other uses tested and applicable.

How to use:
1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitability
of the product.
2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutes
after cleaning.
3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with the
surface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.
4. Suitable application temperature range 5°C to 40°C.

Warnings:
1. Use in a well-ventilated environment.
2. Use solvents in accordance with the appropriate safety regulations.
3. Keep the product out of the reach of children.
4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.


Executive Standard: JC/T 485-2007

No	Test Item		Unit	Actual results
1	Appearance		-	Smooth, no air bubbles, no lumps
2	Tack free time(at what % humidity)		min	10
3	Slump	Vertical	mm	0
		Horizontal	mm	Not deformed
4	Extrusion		ml/min	573
5	Shore A hardness /72h		-	35
6	Shrinkage		%	/
7	Effect of heat aging on		-
	- Weight loss		%	8.7%
	- Cracking		-	No
	- Chalking		-	No
8	Tensile adhesion		Mpa
	- Standard condition			0.93
	- Immersion in water			/
	- Dry at 100°C			/
9	Elongation at break		%	320
10	Specific gravity		g/cm3	1.51
11	Completely dry		hours	30
12	Temperature Resistence		°C	-50ºC~150ºC
13	Application Temperature		°C	4ºC~40ºC
14	Color			Black